High Speed Steel Drill Bits

High Speed Steel

  • Made with quality high speed steel
  • 135º split point tip on all drills 1/8″ diameter and larger eliminates the need for a center punch and keeps the drill from “skating” on hard surfaces
  • All sizes 3/16″ diameter and larger have 3 flats on the drill shank so the drill chuck has a secure grip
  • Edge ground land and margin
  • Sizes available include 1/16″ through 1/2″ in 1/64″ increments
  • Straight shank on bits 25/64” and larger is available
  • Available with black oxide coating for corrosion resistance
hss_drillbit
Number Sized
  • Black oxide coating for corrosion resistance
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • Straight shank
  • 118º tip on drills from #60 – # 31
  • 135º split point tip on all drills #30 diameter and larger eliminates the need for a center punch and keeps the drill from “skating” on hard surfaces
  • Sizes available include #1 through #60

Letter Sized
  • Black oxide coating for corrosion resistance
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • Straight shank
  • 135º split point tip on all drills #30 diameter and larger eliminates the need for a center punch and keeps the drill from “skating” on hard surfaces
  • Sizes available include A through Z

Double Ended

  • Bit is sharpened at both ends for quick switching of a worn tip
  • Made with quality high speed steel
  • Black oxide coating for corrosion resistance
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • Sizes available include 1/8″ and 3/16″
double_ended_drillbit

Stubby

  • Short shank design fits in tight places
  • Made with quality high speed steel
  • Black oxide coating for corrosion resistance
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • Straight shank
  • Sizes available include 1/16″ through 1/2″ in 1/64″ increments
stubby_drillbit

Left Handed

  • Primarily used for extracting screws, this bit turns the opposite direction of a standard bit
  • Made with quality high speed steel
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • Straight shank
  • Sizes available include 1/8” through 3/8”

double_ended_drillbit

Universal Quick Change Hex Shank

  • Made with quality high speed steel
  • Fits all standard 1/4″ hex shank quick change adaptors
  • Fully polished with bright zinc plated shank
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • 135º split point tip on all drills 1/8″ diameter and larger eliminates the need for a center punch and keeps the drill from “skating” on hard surfaces
  • Sizes available include 1/16″ through 1/4″ in 1/64″ increments
universal_quickchange_drillbit

Aircraft Extension

  • Ideal for applications requiring extra drilling depth
  • Available in 6″ lengths from 1/16″ through 3/8″
  • Available in 12″ lengths from 1/8″ through 1/2″
  • Made with quality high speed steel
  • Black oxide coating for corrosion resistance
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • Drill bits 3/8″ diameter and larger have reduced shanks
  • 135º split point tip on all drills 1/8″ diameter and larger eliminates the need for a center punch and keeps the drill from “skating” on hard surfaces
  • All sizes 3/16″ diameter and larger have 3 flats on the drill shank so the drill chuck has a secure grip
aircraft_drillbit

Silver and Deming

  • For drilling large diameter holes in ferrous and non-ferrous metals
  • Designed for use in a drill press at a maximum of 400 RPM
  • Made with quality high speed steel
  • Edge ground land and margin
  • For drilling in most ferrous and non-ferrous metals with the exception of hard metals such as stainless steel
  • 135º split point tip on all drills 1/8″ diameter and larger eliminates the need for a center punch and keeps the drill from “skating” on hard surfaces
  • All sizes have three flats on the drill shank so the drill chuck has a secure grip
  • Drill bits 9/16″ through 3/4″ have a 3/8″ reduced shank
  • Drill bits 17/32″ through 1-1/2″ have a 1/2″ reduced shank
  • Sizes available 9/16″ through 1-1/2″
silverdeming_drillbit