Wood Drilling

Brad Point Drill Bits

  • Premium milled and polished drill bits
  • Bits have a center spur, to prevent the bit from walking, and two shoulder spurs that carve the perimeter of the hole for an exceptionally clean hole
  • For use on all wood and wood composite products
  • All sizes 3/16″ diameter and larger have 3 flats on the drill shank so the drill chuck has a secure grip
  • Sizes available include 1/8” through 5/8” diameters
  • All sizes 3/16″ and larger have 3 flats on the shank so the drill bit is held securely in the chuck
bradpoint_drillbit
Go to top

Spade Drill Bits

  • Heat treated shaft resists bending under heavy loads
  • Side spurs have a twist that aggressively carves the exterior perimeter of the hole for rapid drilling.
  • Center spur prevents the spade bit from “walking”
  • Sizes available include 1/4” through 1-1/2” diameters with 6” drilling depths
  • Sizes available include 1/4” through 1-1/2” diameters with 16” drilling depths
  • 6” and 12” shaft extensions are also available for extra reach or drilling depth
spade_drillbit
Go to top

Wire Installation Drill Bits

  • Drill bit has a hole near the tip in which to thread wire so they can be pulled through a cavity
  • All sizes have 3 flats on the shank so the bit is held securely in the chuck
  • Sizes available include 1/4” through 1/2” diameters with 18” drilling depths
wire_installation_drillbit
Go to top

Flexible Drill Bits

  • Sizes available include 3/8” diameter in 24”, 36” and 54” lengths
  • Sizes available include 9/16” diameter in 36”, 54” and 72” lengths
  • Sizes available include 1/2” diameter in 36”, 54” and 72” lengths
flexible_drillbit
Go to top

Auger Drill Bits

  • For drilling clean, large diameter holes up to 6” deep in wood and wood composite products
  • Bits have a center screw point, to prevent the bit from walking and helps pull the bit through the wood, and a shoulder spurs that carves the perimeter of the hole for an exceptionally clean hole
  • Sharp cutting lip and wide single spiral flutes gives ample clearance for chip flow
  • Hexagonal shank for a secure grip in the drill chuck
  • 3/8″ reduced shank on all sizes 7/16″ and larger
  • Sizes available include 1/4” through 1-1/2” diameters in 6” lengths
auger_drillbit
Go to top

Ship Auger Drill Bits

  • For drilling clean, large diameter holes up to 15” deep in wood, timbers and wood composite products
  • Bits have a center screw point, to prevent the bit from walking and helps pull the bit through the wood, and a shoulder spurs that carves the perimeter of the hole for an exceptionally clean hole
  • Sharp cutting lip and wide single spiral flutes gives ample clearance for chip flow
  • Hexagonal shank for a secure grip in the drill chuck
  • 3/8″ reduced shank on all sizes 7/16″ and larger
  • Sizes available include 1/4” through 1-1/4” diameters in 18” lengths
ship_auger_drillbit
Go to top

Forstner Drill Bits

  • Patented serrated cutting edge quickly removes debris dissipating heat and increasing cutting speed
  • Sizes available include 3/8” through 2-1/8” diameter
forstner_drillbit
Go to top